Home » News » Industry News » How to know one glass cutting machine is good or not?

How to know one glass cutting machine is good or not?

Views: 59     Author: Luciana Wang     Publish Time: 2020-08-26      Origin: Site

Everyone would like to get a good glass cutting machine. But how to know it is good or not?


Today, we are going to share with you some information and hope it is helpful to you.


Firstly, let’s see the countertops


All the countertops are made of PVC resin plate, with high hardness, no deformation, waterproof, and oil-proof. Don’t choose the foam board, because the disadvantage of it, is easy to deform. Also, the shortcomings of density board are fear of water & oil, high humidity, and easy deformation. The entire surface of our PVC resin board is processed by a processing center, and the surface is very smooth. The unprocessed countertop has poor flatness. When cutting 3mm thick glass, the glass is easy to crack. The thinnest glass thickness that our machine can cut is 2mm.




Now, let’s move on to the whole frame structure

The whole frame is annealed after welding. The purpose of annealing treatment is to release the internal stress of steel welding and prevent deformation during later use, thereby affecting the cutting accuracy. Without annealing heat treatment, the cutting accuracy will be greatly reduced.

退火处理  Glass Cutting table


The supporting surface of the whole machine for installing the linear guide rail is processed, and the beam is also annealed steel beam. If you use aluminum beams, it will lead to poor cutting accuracy and poor stability. The cutting accuracy of our cutting machine can be guaranteed to be 0.2mm.


When the machine sucks glass, it works with a telescopic arm, and the machine does not move back and forth. We designed the linear guides on both sides to be used flat, and the linear guides used in the flat can bear even force, long life, and good stability. If it is used upright, only the upper side is stressed, and the machine makes a lot of noise when cutting glass.


Lastly, let’s see the configurations of the main parts

-     Japan Panasonic Sensor

-        German Bohle cutter head

-        American Honeywell Electrical components - Relay

-        Two motorheads to drive the cutting head

-        Taiwan Meanwell Power Supply

-        Taiwan AIRTAC air cylinder

Okay, everybody, please join with me to check the machine now.

CNC Cutting Machine

Wanna to know more about the mahines? Please contact me for more.

Luciana Wang


Whatsapp & Wechat - +8617096025351

  • 11F, Publishing Building, NO.182 Haier Road, Qingdao, Shandong, China.
  • E-MAIL US: