Full-automatic Laminated Glass Cutting Machine

          Full-automatic Laminated Glass Cutting Machine

Characteristic

Frame was made with international square steel tube and box iron by w elding. The key position had been annealing treatment and gantry milling. So the frame has high stability and strength.

Two-part construction to assemble the machine. The first part is the artificial auxiliary feeding and transmission part, equipped with automated positioning system. The second paragraph contains the upper and lower knife cutting system, the cutting film system, the heating system, and the auxiliary discharge system.

Major function

• Easy operation, high cutting precision

• International standard steel with perfect surface treatment

• Key area was annealed and  milled, which ensures the high stability and intensity

• Cutting and breaking pressure adjustable

• Far-infrared heating temperature and heating time adjustable

• Machine includes three sections and bridge frame

Technical parameter

1.Size of machine:4800*3800*1300mm 

2.Weight:about 3000KG 

3.Processing range of glass size:400*400mm ------ 3800*2600mm 

4.Processing range of glass thickness:3+X+3mm--------8+X+8mm 

5.Cutting speed: cutting twice in one minute 

6.Temperature and time of heating: Adjust by operater 

7.Pressure of pushing and breaking: Adjust by operater 

8.Input Voltage ：380V/50HZ（Customizable）

Laminated Glass Cut Flow Chart

Man-machine interface HMI setting system parameters such as glass width, length, under knife pressure, etc.一一 mechanical placement of glass into the synchronous belt area of the cutting table 一一 Automatic transmission and positioning of glass according to the cut size of input （There's a location system）一一 Knife head at zero 一一 Pneumatic lower knife, upper and lower knife wheel cut（There's an automatic injection system）一一 Cut and lift 一一 The upper press starts the press, and the lower surface glass breaks open 一一 Under the top rod up the glass, the upper surface of the glass break open 一一 Heat bar, start heating 一一 The vacuum suction cup absorbs the glass on both sides of the tangent line and pulls the cutting seam apart 一一 Cutting film（PVB or EVA）一一 The cutting action is complete and the entire artifact is transferred to the next segment tangent position（If you need to turn around and cut, you need to do it manually）一一 Whole cutting is complete.一一 Manually move the processed glass to the lower slide flip bracket with the air float assembly.

1.Can automatically set the cutting length width, labor saving. 

2. Compare the previous ones,faster, more accurate.