Site preparationThe dimming glass needs to be connected to the power, so make a glass slot at the position where the glass is installed, the depth of which is 20mm. In order to facilitate glass installation, the glass slot can be made an edge first, and then the other edge can be fixed after the gla

1. Do not hit the glass surface with force at ordinary times. In order to prevent the glass surface from scratching, lay the tablecloth. When you put things on the dimming glass furniture, you should take it with care and avoid collision. 2. In daily cleaning, wipe with wet towel or newspaper.

Glass is not necessarily very flat. The very flat glass you see is generally float glass. "Float" is a kind of technology. The origin, characteristics and production process of float glass are as follows:Float glass is in a tin bath, the glass floats on the surface of liquid tin. Therefore, this kin

Please keep the glass dry and wear transparent rubber gloves before combining. After the glass is tempered, it is relatively clean. Wipe it clean with a dry towel when combining the sheets to start the combination. Please pay attention to moisture-proof protection for the tempered glass before lamin