Automatic Sandblasting Machine For Glass Processing Plant

The equipment has two functions, automatic and manual, Equipped with 4 automatic spray guns and 1 manual spray gun. The lifting of the spray gun and the conveying of the glass are all driven by timing belts, which are stable and durable. The lifting device of the spray gun is located outside the body and has a low failure rate.

Sand thickness: 36#-120# can be used. The better the quality of sand, the higher the efficiency and the smaller the dust. The larger the mesh, the finer the surface of the processed glass, but the dust is slightly larger.

Recommended sand: brown corundum
1. The operation is simple, and the requirements for the operators are relatively low; to pass the difficult time 2. You only need to input the sandblasting height, and the spray gun rises or falls-the width of the glass movement;
3. If the lower part of the glass has a height that is not processed, it can also be set through "Reserve", which is very convenient;
4. The depth of sandblasting can also be controlled by the number and width; mirrors and painted glass can also be added at one time.
When the dust removal effect is not satisfactory, you can pass
Press the button to directly clean the dust on the filter bag.
The spray gun lifting system is outside the body, which is not easy to cause failure.